Before start (Important)

Backing up the current settings file

Pioneer provides a settings file (TSI file) exclusively for use with the Native Instruments “TRAKTOR PRO 2” DJ software. TRAKTOR PRO 2 can be controlled from this unit if this file is imported to your computer.

・A computer on which TRAKTOR PRO 2 is installed is required. ・Not all functions of TRAKTOR PRO 2 are supported.

Users should make their own settings as necessary.

・To make additional settings, see the TRAKTOR 2 operating

manual (PDF file) included with TRAKTOR PRO 2.

・To operate TRAKTOR PRO 2 by using this unit’s buttons and knobs,

see the separate “DDJ-SP1 Hardware Diagram for TRAKTOR PRO 2” (PDF file) of supported functions.

・There are two methods to import this settings file. If you have

imported the settings file by method from step 9 to step 12 in the chapter of “Importing a settings file”, press the [ROLL] button or [SLICER] button on this unit before use. Suitable effects will be set in effect units. When you have imported the settings file by method from step 7 to step 8, you do not have to press the above buttons.

・In this settings file, Deck A/B are assigned to the Track Deck and

Deck C/D are assigned to the Remix Deck. Modifications to other settings are not recommended.

Cautions:

・TRAKTOR PRO 2 is a product of Native Instruments.

Pioneer is not in the position of answering any inquiries on the usage of TRAKTOR PRO 2. Please refer to the Operation Manual of TRAKTOR 2 or other resources.

We recommend backing up the current setting file using the procedure below so that the current settings can be restored if necessary.

・The users who use TRAKTOR PRO 2 for the first time should skip this process.

1.Select (Preference) in the upper right of the screen.

2.On the [Preferences] window, click [Export].

General Disclaimer

・Pioneer will accept no responsibility whatsoever for damages

resulting from downloading or installing this settings file. Operation of this settings file is not guaranteed.

・Users should take full responsibility for downloading, installing

and using this settings file.

・The specifications of this settings file are subject to change

without notice.

・Please note that services regarding this settings file may be terminated without notice.

3. Check the items to be backed up, then click [OK].

Save the file with an easily identifiable name (e.g. BackUp.tsi) in a desired location.

1