6Choose the type of TRAKTOR installation, then click [Next].

Normally install all options, including [Controller Editor] and [Service Center].

7 Choose where to install TRAKTOR, then click [Next].

To choose the normal place of installation, simply click [Next].

To install in a different location, click [Change...], choose the place of installation, then click [Next].

8Select the Native Instruments hardware driver, then click [Next].

Check the check box for your hardware.

9To install the Traktor Kontrol X1 driver, check the check box, then click [Next].

10When the following screen appears, click [Next].

Installation begins.

The installation completed screen appears once installation is completed.

11 Click [Finish].

This completes the installation procedure.

About the installation procedure (Macintosh)

1Insert the included TRAKTOR Pioneer DDJ-T1 EDITION software CD-ROM into the computer’s CD drive.

The [Traktor] icon appears on the screen.

2 Double-click the [Traktor] icon.

The contents of the CD-ROM are displayed.

3 Double-click [Traktor Installer Mac.mpkg].

The TRAKTOR installer is launched.

8En

4Once the TRAKTOR installer is launched, click [Continue].

5Read the contents of the license agreement carefully, then click [Continue].

6If you agree to the contents of the usage agreement, click [Agree].

If you do not agree to the contents of the usage agreement, click [Disagree] to cancel installation.

7Select the Native Instruments hardware driver, then click [Continue].

Check the check box for your hardware.

8 Choose where to install TRAKTOR, then click [Install].

To choose the normal place of installation, simply click [Install]. To install in a different location, click [Change Install Location...], choose the place of installation, then click [Install].

Installation begins.

The installation completed screen appears once installation is completed.