1. Read Before Use (Important)
Cautions
・ Be sure to follow the procedure in this guide to update the
firmware.
・ DO NOT turn off the power or disconnect the USB cable unit
updating is completed.
・ If you should have any questions, please contact the Pioneer
Customer Support Center.
・Update file for DDJ-WeGO
* When the downloaded zip file is double-clicked, the update
file is unzipped.
Example) DDJ-WeGO_V104.jar
・A computer where Java has been installed.
* If Java has not been installed, please download the Java
Runtime Environment (JRE) at: http://java.com and install
it on your computer.
1) Connect the above prepared computer to DDJ-WeGO via the
USB cable included with the product.
2) Turn on the power of DDJ-WeGO while pressing the two
[HEARDPHONE CUE] buttons (Left figure) and ensure the Level
meter LEDs (Right figure) flash before releasing your finger from
the [HEARDPHONE CUE] buttons.
3) When the update file for DDJ-WeGO (DDJ-WeGO_Vxxx.jar) is
activated, the following dialogue is displayed. Click the [Start]
button.
4) The update of the firmware starts.
5) When the firmware update process is complete, click the [OK]
button.
Please note that if you fail to update, turn on the power of
DDJ-WeGO again and start from Step 4) of the above Updating
Procedures.
Reference information
This updater has been verified to operate on the operating
systems below;
・ Windows：Windows® XP / Windows Vista® / Windows® 7
・ Mac OS X：10.6 / 10.7
Approximately 2 minute is required for updating.