Pioneer DEH-2910MP operation manual Other Functions

	Section
Operating this unit	02

Adjusting equalizer curves

You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM.

Adjusting bass/mid/treble

You can adjust the bass/mid/treble level.

3Press a or b to adjust the source vo- lume.

SLA +4 to SLA –4 is displayed as the source

volume is increased or decreased.

# To return to the normal display, press BAND.

English

1Press AUDIO to select BASS/MID/

TREBLE.

2Press a or b to adjust the level.

+6 to –6 is displayed as the level is increased or decreased.

#To return to the normal display, press BAND.

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1Press AUDIO to select LOUD.

2Press a or b to turn loudness on or off.

# You can also turn loudness on or off by press- ing LOUD.

3Press c or d to select a desired level.

LOW (low)—HI (high)

# To return to the normal display, press BAND.

Adjusting source levels

SLA (source level adjustment) lets you adjust the volume level of each source to prevent ra- dical changes in volume when switching be- tween sources.

!Settings are based on the FM tuner volume level, which remains unchanged.

!The MW/LW tuner volume level can also be adjusted with source level adjustments.

1Compare the FM tuner volume level with the level of the source you wish to ad- just.

2Press AUDIO to select SLA.

Other Functions

Adjusting initial settings

Using the initial settings, you can customize various system settings to achieve optimal per- formance from this unit.

1Press SOURCE and hold until the unit turns off.

2Press SOURCE and hold until function name appears in the display.

3Press FUNCTION to select one of the in- itial settings.

Press FUNCTION repeatedly to switch be- tween the following settings:

FM (FM tuning step)—A-PI (auto PI Seek)— AUX (auxiliary input)—TITLE (multi language)

—SAVE (power save)

Use the following instructions to operate each

particular setting.

# To cancel initial settings, press BAND.

# You can also cancel initial settings by holding down SOURCE until the unit turns off.

Setting the FM tuning step

Normally the FM tuning step employed by seek tuning is 50 kHz. When AF or TA is on, the tuning step automatically changes to 100 kHz. It may be preferable to set the tuning step to 50 kHz when AF is on.

!The tuning step remains at 50 kHz during manual tuning.

1 Press FUNCTION to select FM.

En 13