Section
02Operating this unit
4To finish your settings, turn M.C. to se-
lect YES. Press to select.
# If you prefer to change your setting again, turn M.C. to switch to NO. Press to select.
Notes
!You can set up the menu options in the initial settings. For details about the settings, refer to Initial settings on page 18.
!You can cancel set up menu by pressing SRC/ OFF.
Basic operations
Important
!Handle gently when removing or attaching the front panel.
!Avoid subjecting the front panel to excessive shock.
!Keep the front panel out of direct sunlight and high temperatures.
!To avoid damaging the device or vehicle inter- ior, remove any cables and devices attached to the front panel before detaching it.
Removing the front panel to protect your unit from theft
1Press the detach button to release the front panel.
2Push the front panel upward (M) and then pull it toward (N) you.
3Always keep the detached front panel in a protec- tion device such as a protection case.
1Slide the front panel to the left.
Make sure to insert the tabs on the left side of the head unit into the slots on the front panel.
2Press the right side of the front panel until it is firmly seated.
If you cannot attach the front panel to the head unit successfully, make sure that you are placing the front panel onto the head unit correctly. For- cing the front panel into place may result in da- mage to the front panel or head unit.
Turning the unit on
1Press SRC/OFF to turn the unit on.
Turning the unit off
1Press and hold SRC/OFF until the unit turns off.
Selecting a source
1Press SRC/OFF to cycle between:
TUNER
Adjusting the volume
1Turn M.C. to adjust the volume.
CAUTION
For safety reasons, park your vehicle when removing the front panel.
6 En