Operating this unit
Section
02
Note
When this unit’s blue/white lead is connected to the vehicle’s
Using Bluetooth telephone
Important
!Since this unit is on standby to connect with your cellular phone via Bluetooth wireless technology, using it without the engine run- ning can drain the battery power.
!Operations may vary depending on the kind of cellular phone.
!Advanced operations that require attention such as dialing numbers on the monitor, using the phone book, etc., are prohibited while driving. Park your vehicle in a safe place when using these advanced operations.
Setting up for
Before you can use the
1Connection
Operate the Bluetooth telephone connection menu. Refer to Connection menu operation on page 14.
2Function settings
Operate the Bluetooth telephone function menu. Refer to Phone menu operation on page 16.
Basic operations
Making a phone call
1Refer to Phone menu operation on page 16.
Answering an incoming call
1When a call is received, press M.C.
Ending a call
1Press .
Rejecting an incoming call
1When a call is received, press .
Answering a call waiting
1When a call is received, press M.C.
Switching between callers on hold
1Press M.C.
Canceling call waiting
1Press .
Adjusting the other party’s listening volume
1Press c or d while talking on the phone.
!When private mode is on, this function is not available.
Turning private mode on or off
1Press BAND/ while talking on the phone.
Switching the information display
1Press while talking on the phone.
Notes
!If private mode is selected on the cellular phone,
!The estimated call time appears in the display
(this may differ slightly from the actual call time).
Menu operations identical for set up menu/function settings/audio adjustments/ initial settings/lists
Returning to the previous display
Returning to the previous list (the folder one level higher)
1Press .
Returning to the ordinary display
Canceling the initial setting menu/set up menu
1Press BAND/.
Returning to the ordinary display from the list
1Press BAND/.
unit this Operating
En 7