Section

 

02

Operating this unit

Operating this unit

The RCA outputs can be used for rear speaker or

2 Turn M.C. to display KEY COLOR and

press to select.

subwoofer connection.

 

 

 

 

If you switch to SW, you can connect a rear speak-

3 Turn M.C. to select the illumination color.

er lead directly to a subwoofer without using an

You can select one option from the following list.

auxiliary amp.

 

!

30 preset colors (WHITE to ROSE)

Initially, PREOUT is set for rear full-range speaker

 

 

!

SCAN (cycle through all colors)

connection (SW).

 

 

!

3 sets of colors (WARM, AMBIENT, CALM)

1 Press M.C. to select the desired setting.

 

 

!

CUSTOM (customized illumination color)

SW—REA

 

 

 

 

 

! Even if you change this setting, there will

4

Press M.C. to confirm the selection.

be no output if you select OFF in SUB.W

Notes

 

(Refer to SUB.W (subwoofer on/off setting)

 

!

When SCAN is selected, the system auto-

on the previous page).

! If you change this setting, subwoofer out-

!

matically cycles through the 30 preset colors.

put in the audio menu will return to the fac-

When WARM is selected, the system auto-

tory settings.

 

matically cycles through the warm colors.

 

! When AMBIENT is selected, the system au-

DEMO (demo display setting)

 

tomatically cycles through the ambient col-

1 Press M.C. to turn the demo display on or off.

 

ors.

 

!

When CALM is selected, the system auto-

 

SCROLL (scroll mode setting)

 

matically cycles through the calm colors.

When ever scroll is set to ON, recorded text infor-

! When CUSTOM is selected, the customized

 

color saved is selected.

mation scrolls continuously in the display. Set to

 

!

To cancel selecting the illumination color,

OFF if you prefer the information to scroll just

 

press

.

once.

 

 

 

 

1 Press M.C. to turn the ever scroll on or off.

Selecting the display color from

 

the illumination color list

Note

For details about colors on the list, refer to Selecting the key color from the illumination color list on this page.

Selecting key and display color from the illumination color list

You can select the desired colors for the keys and display of this unit.

1Press.

2Turn M.C. to display BOTH COLOR and press to select.

3Turn M.C. to select the illumination color. You can select one option from the following list.

!30 preset colors (WHITE to ROSE)

!SCAN (cycle through all colors)

4Press M.C. to confirm the selection.

Notes

! You cannot select 3 sets of preset colors and

CUSTOM in this function.

! Once you select a color in this function, col-

ors on the keys and display of this unit auto-

matically switch to the color you selected.

! For details about colors on the list, refer to

5 Turn M.C. to adjust the brightness level. Adjustment range: 0 to 60

#You cannot select a level below 10 for all three of R (red), G (green), and B (blue) at the same time.

#You can also perform the same operation on other colors.

Notes

!You cannot create a custom illumination color when SCAN or a set of colors (WARM, AMBIENT, or CALM) is selected.

!You can create custom illumination colors for both KEY COLOR and DISP COLOR.

Switching the dimmer setting

You can adjust the brightness of illumination.

%Press and hold .

Using an AUX source

1Insert the stereo mini plug into the AUX input jack.

2Press SRC/OFF to select AUX as the source.

Note

Selecting the illumination color

This unit is equipped with multiple-color illumi-

You can select the desired colors for the display of this unit.

AUX cannot be selected unless the auxiliary setting is turned on. For more details, refer to AUX (auxiliary input) on the previous page.

nation. You can select desired colors for the keys and display of this unit. You also can customize the colors you want to use.

1Press .

2Turn M.C. to display DISP COLOR and press to select.

Customizing the illumination color

1 Press

.

Turning the clock display on or off

Selecting the key color from the illumination color list

You can select desired colors for the keys of this unit.

1 Press .

3Turn M.C. to select the illumination color. You can select one option from the following list.

!30 preset colors (WHITE to ROSE)

!SCAN (cycle through all colors)

!3 sets of colors (WARM, AMBIENT, CALM)

!CUSTOM (customized illumination color)

2

Turn M.C. to display KEY COLOR or

DISP COLOR. Press to select.

3

Press M.C. and hold until the customizing

illumination color setting appears in the dis-

play.

4

Press M.C. to select the primary color.

%Pressto turn the clock display on or

off.

# The clock display disappears temporarily when you perform other operations, but the clock display appears again after 25 seconds.

4 Press M.C. to confirm the selection.

R(red)—G (green)—B (blue)

10En