Section |
|
|
02 | Operating this unit | Operating this unit |
Part Operation
Press to start talking on the
l 
phone while operating a phone.
| Indicator State |
| Random play is on. |
| (ran- |
6 | The iPod source is selected |
dom/shuf- | |
| and the shuffle or shuffle all |
| fle) |
| function is on. |
CLOCK SET (setting the clock)
1 | Turn M.C. to adjust hour. |
2 | Press M.C. to select minute. |
3 | Turn M.C. to adjust minute. |
Removing the front panel to protect your unit from theft
1 | Press the detach button to release the front |
| panel. |
2 | Push the front panel upward (M) and then pull |
LIST/
Press to display the disc title, track title, folder, or file list depending on the source.
7 | (auto | Shows when the automatic an- |
answer) | swering function is on. |
4 Press M.C. to confirm the selection. |
DEMO (demo display setting)
it toward (N) you. |
m ENTER Press to display the list depending on the source.
While in the operating menu, press to control functions.
Display indication
|
|
|
| 1 |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| 3 |
| 5 | 7 | 9 | ||||
2 4 | 6 8 |
| |||||||
Indicator State
!Tuner: band and frequency
| Main dis- | ! | |
1 | play sec- | device and iPod: elapsed | |
| tion | playback time and text in- | |
|
| formation | |
2 | (list) | The list function is being oper- | |
ated. | |||
|
| ||
|
|
| |
3 | (iPod | This unit’s iPod function is op- | |
control) | erated from your iPod. | ||
|
|
| |
4 | LOC | Local seek tuning is on. | |
|
|
| |
5 | (re- | Track or folder repeat is on. | |
peat) | |||
|
|
|
Connected to a Bluetooth de-
8(Bluetooth vice.
| indicator) The line is on hold. |
9 | The sound retriever function is |
(sound re- | |
| on. |
| triever) |
Set up menu
When you turn the ignition switch to ON after in- stallation, set up menu appears on the display. You can set up the menu options below.
1After installation of this unit, turn the ignition switch to ON.
SET UP appears.
2Turn M.C. to switch to YES. Press M.C. to select.
# If you do not operate for 30 seconds, the set up
menu will not be displayed.
# If you prefer not to set up at this time, turn M.C. to switch to NO. Press to select.
If you select NO, you cannot set up in the set up menu.
3Perform the following procedures to set the menu.
To proceed to the next menu option, you need to confirm your selection.
1Turn M.C. to set the demo display to on or off.
2Press M.C. to confirm the selection. QUIT appears.
4To finish your settings, turn M.C. to select YES. Press to select.
# If you prefer to change your setting again, turn M.C. to switch to NO. Press to select.
Notes
!You can set up the menu options in the initial settings. For details about the settings, refer to Initial settings on page 11.
!You can cancel set up menu by pressing SRC/OFF.
Basic operations
Important
!Handle gently when removing or attaching the front panel.
!Avoid subjecting the front panel to excessive shock.
!Keep the front panel out of direct sunlight and high temperatures.
!To avoid damaging the device or vehicle inte- rior, remove any cables and devices attached to the front panel before detaching it.
3Always keep the detached front panel in a pro- tection device such as a protection case.
1Slide the front panel to the left.
Make sure to insert the tabs on the left side of the head unit into the slots on the front panel.
2Press the right side of the front panel until it is firmly seated.
If you cannot attach the front panel to the head unit successfully, make sure that you are placing the front panel onto the head unit cor- rectly. Forcing the front panel into place may result in damage to the front panel or head unit.
Turning the unit on
1Press SRC/OFF to turn the unit on.
Turning the unit off
1Press and hold SRC/OFF until the unit turns off.
4
En