Section |
|
|
02 | Operating this unit |
|
| Tuner | 2 Press one of the preset tuning buttons (1 |
Operating this unit
to 6) to select the desired station. |
SEEK (left/right key setting)
Switching between compressed audio and
Basic operations
Selecting a band
1Press BAND/
until the desired band (FM1, FM2,FM3 for FM or AM) is displayed.
Press BAND until the desired band (FM1, FM2, FM3 for FM or AM) is displayed.
Recalling preset stations
1Press c or d.
!If MAN (manual tuning) is selected in SEEK, you cannot recall preset stations. You need to select PCH (preset channel) in SEEK. For de- tails about the settings, refer to SEEK (left/right key setting) on this page.
Manual tuning (step by step)
1Press c or d.
!If PCH (preset channel) is selected in SEEK, you cannot tune up or down manually. You need to select MAN (manual tuning) in SEEK. For details about the settings, refer to SEEK (left/right key setting) on this page.
Seeking
1Press and hold c or d, and then release.
You can cancel seek tuning by briefly pressing c or d.
While pressing and holding c or d, you can skip stations. Seek tuning starts as soon as you release c or d.
Storing and recalling stations for each band
Using preset tuning buttons
1When you find a station that you want to store in memory, press one of the preset tuning buttons (1 to 6) and hold until the preset number stops flashing.
6
En
Switching the display
Selecting the desired text information
1Press 
.
Program service
!Depending on the band, text information can be changed.
!Text information items that can be changed depend on the area.
Function settings
1Press M.C. to display the main menu.
2Turn M.C. to change the menu option and press to select FUNCTION.
3Turn M.C. to select the function.
After selecting, perform the following procedures to set the function.
BSM (best stations memory)
BSM (best stations memory) automatically stores the six strongest stations in the order of their signal strength.
1Press M.C. to turn BSM on. To cancel, press M.C. again.
LOCAL (local seek tuning)
Local seek tuning lets you tune in to only those radio stations with sufficiently strong signals for good reception.
1Press M.C. to select the desired setting. FM:
The highest level setting allows reception of only the strongest stations, while lower levels allow the reception of weaker stations.
You can assign a function to the left and right keys of the unit.
Select MAN (manual tuning) to tune up or down manually or select PCH (preset channel) to switch between preset channels.
1Press M.C. to select MAN or PCH.
Basic operations
Playing a
1Insert the disc into the disc loading slot with the label side up.
Ejecting a
1Press h.
Playing songs on a USB storage device
1Open the USB port cover.
2Plug in the USB storage device using a USB cable.
A song will be played automatically.
Stopping playback of files on a USB storage device
1You may disconnect the USB storage device at any time.
The unit stops playback.
Selecting a folder
1Press 1/
or 2/
.
Selecting a track
1Press c or d.
Fast forwarding or reversing
1Press and hold c or d.
!When playing compressed audio, there is no sound during fast forward or reverse.
Returning to root folder
1Press and hold BAND/
.
Switching between playback memory devices
You can switch between playback memory devices on USB storage devices with more than one Mass Storage
1Press BAND/
.
!You can switch between up to 32 different memory devices.
Note
Disconnect USB storage devices from the unit when not in use.
Displaying text information
Selecting the desired text information
1Press 
.
!Depending on the version of iTunes used to write MP3 files to a disc or media file types, in- compatible text stored within an audio file may be displayed incorrectly.
!Text information items that can be changed depend on the media.
Selecting and playing files/ tracks from the name list
1Press 
to switch to the file/track name list mode.
2Use M.C. to select the desired file name (or folder name).
Changing the file or folder name
1Turn M.C.
Playing
1When a file or track is selected, press M.C.