Before you start

Section

01

U.S.A.

Pioneer Electronics (USA) Inc.

CUSTOMER SUPPORT DIVISION P.O. Box 1760

Long Beach, CA 90801-1760 800-421-1404

CANADA

Pioneer Electronics of Canada, Inc.

CUSTOMER SATISFACTION DEPARTMENT 340 Ferrier Street

Unit 2

Markham, Ontario L3R 2Z5, Canada 1-877-283-5901 905-479-4411

For warranty information please see the Limited Warranty sheet included with this unit.

In case of trouble

Should this unit fail to operate properly, please contact your dealer or nearest authorized PIONEER Service Station.

!Before using this unit for the first time after installation

!If the unit fails to operate properly

!When strange or incorrect messages ap- pear on the display

1 Remove the front panel.

For details, refer to Removing the front panel to protect your unit from theft on page 9.

2Press RESET with a pen tip or other pointed instrument.

RESET button

Switching the DSP setting mode

start you Before

Visit our website

http://www.pioneerelectronics.com in Canada http://www.pioneerelectronics.ca

!Learn about product updates (such as firm- ware updates) for your product.

!Register your product to receive notices about product updates and to safeguard purchase details in our files in the event of loss or theft.

!Access owner’s manuals, spare parts infor-

mation, service information, and much more.

This unit features two operation modes: the 3- way network mode (NW) and the standard mode (STD). You can switch between modes as desired. Initially, the DSP setting is set to the standard mode (STD).

!After switching, reset the microprocessor.

WARNING

Do not use the unit in standard mode when a speaker system for 3-way network mode is connected to this unit. This may cause damage to the speakers.

Resetting the microprocessor

The microprocessor must be reset in the following situations:

En 5