Section

 

 

 

 

 

 

 

 

 

 

 

 

02

 

Operating this unit

 

 

 

 

 

Set up menu

 

 

 

 

 

Demonstration (demo display setting)

 

 

When you turn the ignition switch to ON after

1

Turn M.C. to set the demo display to off.

 

 

installation, set up menu appears on the dis-

 

 

2

Press M.C. to confirm the selection.

 

 

play.

 

 

 

Quit appears.

You can set up the menu options below.

1After installation of this unit, turn the ignition switch to ON.

SET UP appears.

2Turn M.C. to switch to YES.

#If you do not operate for 30 seconds, the set up menu will not be displayed.

#If you prefer not to set up at this time, turn M.C. to switch to NO.

If you select NO, you cannot set up in the set up menu.

3Press M.C. to select.

4Perform the following procedures to set the menu.

To proceed to the next menu option, you need to confirm your selection.

5To finish your settings, turn M.C. to se-

lect YES.

# If you prefer to change your setting again, turn M.C. to switch to NO.

6Press M.C. to select.

Notes

!Because demonstration mode is the function for displaying at stores, do not use this func- tion while driving.

!You can set up the menu options in the initial settings. For details about the settings, refer to Initial settings on page 35.

!You can cancel set up menu by pressing SRC/ OFF.

Language select (multi-language)

1Turn M.C. to select the desired language. English—Français—Español

2Press M.C. to confirm the selection.

Calendar (setting the date)

1Turn M.C. to change the year.

2Press M.C. to select day.

3Turn M.C. to change the day.

4Press M.C. to select month.

5Turn M.C. to change the month.

6Press M.C. to confirm the selection.

Clock (setting the clock)

1Turn M.C. to adjust hour.

2Press M.C. to select minute.

3Turn M.C. to adjust minute.

4Press M.C. to confirm the selection.

Contrast (display contrast setting)

1Turn M.C. to adjust the contrast level.

0 to 15 is displayed as the level is increased or de- creased.

2Press M.C. to confirm the selection.

8 En

Basic operations

Important

!Handle gently when removing or attaching the front panel.

!Avoid subjecting the front panel to excessive shock.

!Keep the front panel out of direct sunlight and high temperatures.

!To avoid damaging the device or vehicle inter- ior, remove any cables and devices attached to the front panel before detaching it.