Additional information

Troubleshooting

 

A Bluetooth connected cellular phone is currently

Symptoms are written in bold and causes in reg-

 

being operated.

 

Do not use the cellular phone at this time.

ular, non-indented text. Regular, indented text is

 

 

A call was made with a Bluetooth connected cellular

used to indicate actions to be taken.

 

 

phone and then immediately terminated. As a result,

 

 

 

 

communication between this unit and the cellular

The display automatically returns to the ordinary

 

phone was not terminated properly.

 

Reconnect the Bluetooth connection between

display.

 

 

this unit and the cellular phone.

You did not perform any operation within about 30

 

 

 

seconds.

 

 

Perform operation again.

 

Error messages

 

 

The repeat play range changes unexpectedly.

 

When you contact your dealer or your nearest

Depending on the repeat play range, the selected

 

Pioneer Service Center, be sure to note the error

range may change when another folder or track is

 

message.

being selected or during fast forwarding/reversing.

 

Symptoms are written in bold and causes in reg-

Select the repeat play range again.

 

ular, non-indented text. Regular, indented text is

 

 

used to indicate actions to be taken.

A subfolder is not played back.

 

 

Appendix

Additional information

 

 

 

 

 

ERROR-07, 10, 11, 12, 15, 17, 30, A0

 

NO AUDIO

 

 

 

 

 

There is an electrical or mechanical error.

 

There are no songs.

 

English

Turn the ignition switch OFF and back ON, or

 

Transfer the audio files to the USB storage device

 

switch to a different source, then back to the CD

 

and connect.

 

player.

 

The connected USB storage device has security en-

 

 

 

 

 

 

 

 

 

 

abled.

 

 

ERROR-15

 

 

 

Follow the USB storage device instructions to

 

 

The inserted disc is blank.

 

disable the security.

 

 

Replace the disc.

 

 

 

 

 

SKIPPED

 

 

 

 

 

 

ERROR-23

 

 

 

The connected USB storage device contains DRM

 

 

Unsupported CD format.

 

protected files.

 

 

Replace the disc.

 

The protected files are skipped.

 

 

 

 

 

 

 

FORMAT READ

 

PROTECT

 

 

Sometimes there is a delay between the start of play-

 

All the files on the connected USB storage device

 

 

back and when you start to hear any sound.

 

are embedded with DRM.

 

 

Wait until the message disappears and you hear

 

Replace the USB storage device.

 

 

sound.

 

 

 

 

 

 

 

 

Subfolders cannot be played when FLD (folder re- peat) is selected.

Select another repeat play range.

NO XXXX appears when a display is changed (NO TITLE, for example).

There is no embedded text information.

Switch the display or play another track/file.

The unit is malfunctioning.

There is interference.

Common

AMP ERROR

This unit fails to operate or the speaker connection is incorrect; the protective circuit is activated.

Check the speaker connection. If the message fails to disappear even after the engine is switched off/on, contact your dealer or an authorized Pioneer Service Station for assistance.

 

 

N/A USB

NO AUDIO

 

The connected USB device is not supported by this

The inserted disc does not contain any playable files.

 

unit.

Replace the disc.

 

! Connect a USB Mass Storage Class compliant

 

 

device.

 

SKIPPED

 

! Disconnect your device and replace it with a

The inserted disc contains DRM protected files.

 

compatible USB storage device.

 

 

The protected files are skipped.

 

CHECK USB

 

 

PROTECT

 

The USB connector or USB cable has short-

All the files on the inserted disc are embedded with

 

circuited.

 

Check that the USB connector or USB cable is

 

 

You are using a device, such as a cellular phone, that may cause audible interference.

Move electrical devices that may be causing the interference away from the unit.

CD player

ERROR-07, 11, 12, 17, 30

DRM.

 

not caught in something or damaged.

Replace the disc.

 

 

 

 

 

CHECK USB

 

 

The sound from the Bluetooth audio source is not played back.

There is a call in progress on a Bluetooth connected cellular phone.

The sound will be played back when the call is terminated.

The disc is dirty. Clean the disc.

The disc is scratched. Replace the disc.

USB storage device/iPod

FORMAT READ

Sometimes there is a delay between the start of playback and when you start to hear any sound.

Wait until the message disappears and you hear sound.

The connected USB storage device consumes more than maximum allowable current.

Disconnect the USB storage device and do not use it. Turn the ignition switch to OFF, then to ACC or ON and then connect only compliant USB storage devices.

En 23