Section

02Using this unit

When ever scroll is set to ON, recorded text information scrolls continuously in the display. Set to OFF if you prefer the information to scroll just once.

1Press M.C. to turn the ever scroll on or off.

BT AUDIO (Bluetooth audio activation)

You need to activate the BT Audio source in order to use a Bluetooth audio player.

1Press M.C. to turn the BT Audio source on or off.

Clear memory (clearing the Bluetooth device data stored on this unit)

Bluetooth device data stored on this unit can be cleared. To protect your personal information, clear the device memory before you pass the unit on to someone else. The following information will be de- leted.

!Device list

!PIN code

!Call history

!Phone book

1Press M.C. to show the confirmation display. Clear memory YES is displayed. Clearing mem- ory is now on standby.

If you do not want to clear the Bluetooth device data stored on this unit, turn M.C. to display Can- cel and press it again to select.

2Press M.C. to clear the memory.

Cleared is displayed and the Bluetooth device data is cleared.

!While this function is in use, do not turn off the engine.

BT Version info. (Bluetooth version display)

You can display the system versions of this unit and of Bluetooth module.

1Press M.C. to display the information.

APP CONNECT MODE (APP connect mode setting)

Select an appropriate option for your smartphone.

1Press M.C. to select the desired setting.

Wired (for iPhone)—Bluetooth (for Android de- vice)

Set up menu

1Press and hold SRC/OFF until the unit turns off.

2Press and hold M.C. until the main menu appears in the display.

3Turn M.C. to change the menu option and press to select SETUP.

4Turn M.C. to select the set up menu function.

Once selected, the following set up menu functions can be adjusted.

!Software Update is not available for DEH- X7500SD.

FM step (FM tuning step)

Normally, the FM tuning step setting used for seek tuning is 50 kHz. The tuning step changes to 100 kHz automatically when the alternative frequencies search or traffic announcement standby function is in use. It may be preferable to set the tuning step to

50 kHz when the alternative frequencies search function is on.

1Press M.C. to select the FM tuning step. 50kHz (50 kHz)—100kHz (100 kHz)

S/W control (rear output and subwoofer setting)

This unit’s rear output (rear speaker leads output and RCA rear output) can be used for full-range speaker (Rear SP :F.Range) or subwoofer (Rear SP :S/W) con- nection. If you switch the rear output setting to Rear SP :S/W, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp.

1Press M.C. to switch the rear output setting.

!When no subwoofer is connected to the rear output, select Rear SP :F.Range (full-range speaker).

!When a subwoofer is connected to the rear output, select Rear SP :S/W (subwoofer).

!Even if you change this setting, there will be no output unless you turn the subwoofer output on (refer to Subwoofer1 (subwoofer on/off setting) on page 25).

!If you change this setting, subwoofer output in the audio menu will return to the factory settings.

!Both rear speaker lead outputs and RCA rear out- put are switched simultaneously in this setting.

30 En