Using this unit
Section
02
This unit stores recent broadcasts to memory automatically. The memory capacity of this unit will vary depending on the bit rate of the Service Component used. The approximate memory capacity is five minutes for 192 kbps. Stored selections that are older than what can be stored in the memory will not be available.
Selecting a Service Component
You can select a Service Component from the following service list.
1Press 
(list) to switch to the service list mode.
2Turn M.C. to change the service list and press to select.
Once selected, the following Service Compo- nent functions can be adjusted.
SERVICE (service label)
You can select a Service Component from the list of all components.
1Turn M.C. to select a Service Component.
2Press M.C. to receive a broadcast from the se-
lected Service Component. Using alphabet search
1Press 
(list).
2Turn M.C. to select a letter.
3Press M.C. to display the alphabetical list.
4Turn M.C. to select a Service Component.
5Press M.C. to receive a broadcast from the se- lected Service Component.
PROGRAM TYPE (PTY label)
You can select a Service Component from PTY infor- mation.
1Turn M.C. to scroll to the desired PTY information and press it to select.
2Turn M.C. to select a Service Component.
3Press M.C. to receive a broadcast from the se- lected Service Component.
ENSEMBLE (ensemble label)
You can select a Service Component from the relevant ensemble.
1Turn M.C. to scroll to the desired ensemble and press it to select.
2Turn M.C. to select a Service Component.
3Press M.C. to receive a broadcast from the se- lected Service Component.
PCH LIST (setting preset channels)
You can store your favorite Service Components as presets and recall them later on.
1Turn M.C. to select a preset channel.
2Press and hold M.C. to store the Service Compo- nent as a preset.
3Press M.C. to recall the preset channel.
!You can tune the channel up or down manu- ally by pressing 
or 
.
Updating service list information
You can receive updates to the service list.
%Press and hold down 
(list).
To cancel, press and hold 
(list) again.
Function settings
1Press M.C. to display the main menu.
2Turn M.C. to change the menu option and press to select FUNCTION.
Once selected, the function below can be ad- justed.
S.FOLLOW (alternative Service Component search)
If the tuner cannot get good reception, the unit will automatically search for another ensemble that supports the same Service Component. If no alternative Service Component can be found or reception remains poor, this function will automatically switch to an identical FM broadcast.
1Press M.C. to turn alternative Service Component search on or off.
unit this Using
En 
9