Pioneer DJM-1000, DRB1371D DIGITAL LINK FUNCTION, EFX, CDJ, CDJ, link, Link), MIXER, MIXER, EFX-1000, DJM-1000, AV MIXER, OPERATIONS, Link system diagram, BPM link (Sound Link)

OPERATIONS

DIGITAL LINK FUNCTION

Link system diagram

DJ effecter supporting digital link
		Fader		effect
		(EFX			link
			link)
EFX-1000		Audio			EFX 1 (2)	DJM-1000
				signal
	BPM link
(Sound		Link)				–26	+6

AV mixer supporting

digital link

morphing Visual

VISUAL	Link)
	(Visual

DJ CD player supporting		start
digital link
	Fader
		signal
		Audio
		link
		BPM	Link)
		(Sound

SOUND 1

SOUND 2

	Fader		start
Audio		signal
BPM link
(Sound	Link)

DJ CD player supporting

digital link

Digital link connections for EFX-1000

Use a digital link cable to connect a PIONEER DJ effector (EFX- 1000) to the EFX 1 or 2 connectors of this unit.

This link provides a high-fidelity digital connection and enables use of the EFX-1000’s effects functions.

Operations following connection are the same as those when “USING EXTERNAL EFFECTORS” (P.14). If the SEND/RETURN connectors (phone plug cable) are connected simultaneously, the EFX link input/output connection (via the digital link cable) is automatically given priority.

For more information regarding settings, consult the EFX-1000 Operating Instructions.

Fader effect link (EFX Link)

When the connections described above have been made, moving the channel fader slider produces the same effects as when operating the EFX-1000’s jog dial.

1.Set EFX-1000’s digital jog break to ON.

2.Use the SEND channel selector switches to select the channel to be used for fader effects (channel [1]-[6] can be selected).

3.Set the effector LINK buttons (EFX 1, 2) to ON.

÷ The effector LINK buttons will light.

Note: The sound volume for the channel selected will become the same as that set with the maximum channel fader; as a result, make your selection after confirming the level of sound produced when the channel fader is set to maximum.

4.Turn the SEND/RETURN button ON.

÷The SEND/RETURN button will flash.

5.Operate the fader for the selected channel.

÷The EFX-1000’s digital job break meter and sound will change in response to the position of the channel fader.

÷When the selected channel is assigned to the cross fader, the effect sound will change in accordance with the position of the cross fader.

÷When the SEND channel selector switch setting is changed, the fader effect link is canceled, and the effector LINK button indicator goes out.

Digital link connections for the digital link DJ CD player

A digital link cable can be used to connect a digital link DJ CD player to the SOUND 1, 2 connectors of this unit.

This link provides a high-fidelity digital connection for mixing of sounds from the DJ CD player.

The fader start function is also enabled by means of this single digital link.

BPM link (Sound Link)

When a digital link cable is used to connect a supported DJ CD player to the SOUND 1, 2 connectors, and the DJ effector EFX- 1000 is connected via digital link cable to the EFX 1 or 2 connectors, the effects can be added at the more accurate BPM value measured with the DJ CD player.

EFX operate at

BPM of CDJEFX (with BPM AUTO)

		3
	Connect to			Connect to
	channel 1			channel 2
CDJ			MIXER		CDJ
	3			2

Assign channel [1] or [2] with SEND channel selector switch

Visual morphing (Visual Link)

When a digital link cable is used to connect the DJ mixer’s VISUAL connector to an AV mixer supporting digital link (and with the link function enabled),the AV mixer’s cross fader can be moved automatically in linkage with the cross fader of the DJ mixer, thus allowing both audio and video to be modified together.

Video signal	3	AV MIXER				3 Output
	3
			3
				Link cable
	3		3			3 Output
Audio signal			MIXER
	3				15