9.Can I use stickers or labels on my DVD recordable discs?
Labels can cause the disc to become unbalanced and are not recommended. An imbalanced disc can warp or shatter and may damage the drive. To label your DVD, use printable media available at most computer and video supply stores.
10.How many times can I rewrite a DVD-RW disc?
The media is rated for 1,000 rewrites. Please check with your preferred media manufacturer for specific information.
11.How much recording time do I have on a disc?
The
12.What is a region code and is it required?
•Region codes were created at the request of Hollywood movie studios to allow the studios to control distribution of their movies.
•Region codes are not mandatory.
•There are eight (8) region codes for DVD covering all areas of the globe.
•Most of North America (USA and Canada) and Japan are designated Region 1. For more information about region codes, please visit the DVD Forum website at http://www.dvdforum.org
13.Can the drive set/record a region code on my DVD±R/RW
No, DVD recordable drives like the
14.Does recordable media have a copy protection scheme to block illegal copying? General
15.What is “Firmware” and why should I care about it?
Firmware is a drive’s internal programming that allows it to recognize various types of discs and perform the correct write strategy for that media.
16.Can my current writer drive record to “CSS on R media” with the proper software? No, the firmware and drive hardware do not support this type of recording. At the time of this document release, the technology is still very expensive.
17.Can I replace my current writer drive with a Pioneer drive in my duplicator?
Please contact your duplicator manufacturer to confirm that they have qualified this or other Pioneer drives for your specific duplicator model. Most duplicators have proprietary firmware for the installed drives which may not be compatible with a newer drive.
18.What ribbon cable should I use to connect my drive in the PC?
This drive has a Serial ATA (SATA) interface, so a SATA cable is required to be used with it.
Page 2 of 3 pages | release date: 6/24/2008 |