2.0SAFETY INSTRUCTIONS
To ensure your personal safety and to maximize the full operating potential of your drive, read and follow the precautions listed below.
2.1Drive Precautions
This section discusses installation concerns and drive maintenance.
Arrangement – This drive may only be installed horizontally. Do not install the drive vertically.
Environment – Avoid installing this drive in a location with exposure to large quantities of dust, high temperatures, high humidity, or subject to excessive vibrations or shocks.
Power – Turn OFF the system before installing this or any other hardware device.
Read & Retain Instructions – Read all operating and user information provided with this drive.
Cleaning – Use a damp cloth to clean the exterior housing. Avoid using any fluids including liquid, aerosol or
Water or Moisture – Avoid operating or locating this drive near water or other sources of fluid.
Power Sources – Operate this drive only from the recommended power sources. If you are unsure of the power source, consult an authorized Pioneer representative.
Overloading – Avoid connecting too many devices to a single wall socket or power source as this can cause fires or short circuits.
Object & Liquid Entry – Never push inappropriate objects in to the device. Avoid spilling any liquids in to or on the outside of the drive.
Condensation – Moisture can form in the operating section of the product if the drive is taken from cool surroundings to a room with a warmer temperature. Let the drive stand for one to two hours in the new location before turning it ON.
Servicing – Opening or removing the cover exposes you to possible electrical shock or other danger. Contact a Pioneer authorized service representative for repairing this drive (refer to the enclosed Service & Support Card).
2.2Disc Precautions
Cracked or warped discs may damage the drive. If a disc breaks inside of the unit, pieces are likely to strike the optics.
- 3 -