Section
03 
Installation
Important
!Check all connections and systems before final installation.
!Do not use unauthorized parts as this may cause malfunctions.
!Consult your dealer if installation requires dril- ling of holes or other modifications to the vehi- cle.
!Do not install this unit where:
—it may interfere with operation of the vehi- cle.
—it may cause injury to a passenger as a re- sult of a sudden stop.
!The semiconductor laser will be damaged if it overheats. Install this unit away from hot places such as near the heater outlet.
!Optimum performance is obtained when the unit is installed at an angle of less than 60°.
2 Secure the mounting sleeve by using a screwdriver to bend the metal tabs (90°) into place.
1
2
1Dashboard
2Mounting sleeve
3 Install the unit as illustrated.
Use commercially available parts when instal- ling.
1
60°
DIN front/rear mount
4
5
2
3
This unit can be properly installed using either
DIN
1Insert the mounting sleeve into the dashboard.
For installation in shallow spaces, use the sup- plied mounting sleeve. If there is enough space, use the mounting sleeve that came with the vehicle.
1Nut
2Firewall or metal support
3Metal strap
4Screw
5Screw (M4 × 8)
#Make sure that the unit is installed securely in place. An unstable installation may cause skip- ping or other malfunctions.
12
En