Connecting the units
2Twist the battery wire, ground wire and system remote control wire.
Twist
3Attach lugs to wire ends. Lugs not sup- plied.
Use pliers, etc., to crimp lugs to wires.
1Lug
2Battery wire
3Ground wire
4Connect the wires to the terminal. Fix the wires securely with the terminal screws.
1System remote control terminal
2GND terminal
3Power terminal
Section
03
4 | Terminal screws | English |
| ||
5 | Battery wire |
|
6 | Ground wire |
|
7 | System remote control wire |
|
Connecting the speaker output terminals
1Expose the end of the speaker wires using nippers or a cutter by about 10 mm (3/8 inch) and twist.
Twist
2Attach lugs to speaker wire ends. Lugs not supplied.
Use pliers, etc., to crimp lugs to wires.
1Lug
2Speaker wire
3Connect the speaker wires to the speaker output terminals.
Fix the speaker wires securely with the term- inal screws.
En | 9 |