PIB # 190109
Pioneer Electronics (USA) Inc. (310) 952-2000 Released: July 21, 2006
8) Rename the VOB file using an attached keyboard (sold separately).
9) Click on the Export button to place the file in the HDD’s VOB folder.
Access the VOB folder on the recorder’s HDD using either the Eithernet connection
or from FTP.
Note: When the exported clip has a file size exceeding 1 Gigabyte, the exported VOB consists
of multiple file names. The actual file name is that typed in using the “VOB name”
command followed by consecutive numbers and an extension.
Export the VOB File Using a Network Connection
VOB files can be exported from the PRV-LX1 using FTP when it is connected to a network via the
Ethernet connector on the unit’s rear panel. Any FTP software can be used to transfer VOB files.
For this example Internet Explorer version 6.0 is used. The instructions below provide step-by-step
directions to connect the PRV-LX1 to a network and to transfer files from the PRV-LX1 to a PC.
Activate the Network Option on the PRV-LX1
Follow the steps below to turn ON the network option.
1) Connect the PRV-LX1 to a network using either a straight cable connected to a hub or
a cross cable.
2) Select the Function button on the PRV-LX1’s front panel to access the main menu.
3) Select System under the SETUP section.
4) Select Network (far left column) to display the Network submenu.
5) Select Network (middle column) to display the options.
6) Select ON to activate.
7) Verify that an orange box ( ) appears next to ON.
Example: Network set to ON Example: Network Selections
Home & Business Group of America (800) 872-4159 Page 3 of 6