Section

03Operating this unit

Wide Mode (switching the wide mode)

!Refer to Wide Mode (switching the wide mode) on page 19.

Notes

!Operation is complete even if the menu is can- celled before being confirmed.

!You can select Display and Wide Mode, when Video has been selected.

!You can select the following functions if the background setting on the entertainment menu is off.

—Wide Mode (switching the wide mode)

—Display (display setting)

Using an external unit

An external unit refers to a Pioneer product, such as those which will be available in the fu- ture. Although incompatible as a source, the basic functions of up to two external units can be controlled with this unit. When two external units are connected, the external units are automatically allocated to external unit 1 or external unit 2.

The basic operations of the external unit are explained below. The allocated functions will differ depending on the connected external unit. For details concerning these functions, refer to the owner’s manual for the external unit.

Selecting the external unit as the source

%Press SRC/OFF to select External as the source.

Basic operations

The functions allocated to the following operations will differ depending on the connected external unit. For details concerning these functions, refer to the owner’s manual for the connected external unit.

%Press and hold BAND on the remote control.

%Push M.C. left or right.

%Push and hold M.C. left or right.

%Push M.C. up or down.

%Press any number key from 1 to 6 on the remote control (MVH-P8200BT only).

Using the functions allocated to 1 to 6 keys

1 Displaying the list menu.

Refer to Basic menu operations on page 12.

2Use M.C. to select 1 KEY to 6 KEY. Turn to change 1 KEY to 6 KEY and press.

Function settings

1Press M.C. to display the function menu.

2Turn M.C. to select the function.

Turn to change the menu option. Press to se- lect.

Function 1 (function 1)—Function 2 (function 2)—Function 3 (function 3)—Function 4 (function 4)—Auto/Manual (auto/manual)

Using the PGM button

This function is available only for MVH-P8200BT. You can operate the preprogrammed functions for each source by using PGM on the remote control.

%Press PGM to turn pause on when se- lecting the following sources:

!USB /iPod – USB/iPod

!SD – SD memory card

#To turn pause off, press PGM again.

%Press BAND on the remote control.

36 En