Available accessories

For details concerning operation, refer to the XM tuner’s operation manuals. This section provides information on XM operations with this unit which differs from that described in the XM tuner’s operation manual.

!With this unit, you can operate two addi- tional functions: XM channel direct selec- tion and preset channel list.

Basic Operations

1

16:54

XM

32

1Indicator display area

Refer to Indicator list on page 48.

2Text information area

!Channel name

!Artist name

!Song title

!Band/Preset number/Frequency indica- tor

3Source image display

Selecting a channel (step by step)

1Push M.C. left or right.

!If you push and hold M.C. left or right, you can increase or decrease the channel number continuously.

!You can also perform tuning from a desired channel category. (Refer to Selecting a chan- nel from a channel category on the next page.)

Switching the display off 1 Press and hold.

Storing and recalling stations

Operations are basically the same as those of the tuner. (Refer to Storing and recalling stations on page 14.)

Section

05

However, the band selection method is differ-

English

 

ent from that of the tuner.

 

!Push M.C. down.

Band can be selected from XM1, XM2 or XM3.

Selecting an XM channel directly

This function is available only for MVH-P8200BT. When using the remote control, you can select the channel directly by entering the desired channel number.

1Press DIRECT.

The channel number input display appears.

2Press 0 to 9 to enter the desired channel number.

!You can cancel the input number by pressing Clear.

3Press DIRECT.

The channel of the entered number is selected.

!After entering the number input mode, if you do not perform an operation within about eight seconds, the mode is automatically can- celed.

Function settings

1Press M.C. to display the function menu.

2Turn M.C. to select the function.

After selecting, perform the following procedures to set the function.

Channel Mode (channel select mode setting)

You have two methods for selecting a channel: by number and by category. When selecting by number, channels in any category can be selected. Select by category to narrow your search down to only channels in a particular category.

1Press M.C. to display the setting mode.

2Turn M.C. to select the desired setting.

All CH (channel number select setting)—Cate- gory (channel category select setting)

3Press M.C. to confirm the selection.

En 41