12
GENERAL SPECIFICATIONS
(3) Multi Video Processor (Referred to MVP below)Input signal
Input video signal (NTSC)
Note 1
1-line............................................. BNC terminal
(One RGB input system can be added with addition
of optional RGB board)
1Composite video signal
......................1.0 V(p-p) (75ohm terminated)
2Y/C separation signal
Y (With sync) ...................1.0 V(p-p) (75ohm)
C burst level.................0.286 V(p-p) (75ohm)
*1 or 2 signal format can be selected
3Optional RGB input signal
RGB signal........................ 0.7 V(p-p)(75ohm)
H.V.................................................... TTL level
C SYNC.............0.3-4 V(p-p) (Negative logic)
Green (Sync on Green)... 1.0 V(p-p) (75ohm)
SYNC............................................... 0.3 V(p-p)
SYNC priority order
H.V > C SYNC > Green (Sync on Green)
RS-232C control input 25-pin D-SUB
Output signal
Output video signal
4-line.............................................. BNC terminal
1 Composite sync signal..... 1.0 V(p-p) (75ohm)
2 Y/C separation signal
Y (With sync) ....................1.0 V(p-p) (75ohm)
C (With burst) Burst level
.......................................0.286 V(p-p) (75ohm)
*1 and 2 signal formats are output simulta-
neously.
3 RGB signal
Green (Sync on Green)................... 1.0 V(p-p)
SYNC................................................ 0.3 V(p-p)
B.R.................................................... 0.7 V(p-p)
Note 1: The built-in multi video processor can be made
usable for RGB and PAL inputs if options are
added. For more information, contact Pioneer.