13
GENERAL SPECIFICATIONS
MVP Panel
RESET
GEN
LOCK
EXT
INT
NTSC
RGB
FILTER ON
OFF
VBS
Y/C
MODE
RATE
RS-232C
VD
H/C SYNC
R
B
G VBS Y
C
INPUT OUTPUT
VOUT1 VOUT3
VOUT2 VOUT4
VBS/G
Y/B
C/R
VBS/G
Y/B
C/R
VBS/G
Y/B
C/R
VBS/G
Y/B
C/R
ON
OFF
POWER
=23~!@15789460-1POWER switch (Power)
Used to turn on/off the MVP power.
2Reset button
System reset button. When this switch is
pressed, the system sets into the manual mode
and operates in the modes of the switches set
on the panel.
3EXT/INT switch
Normally, this is set to the INT side so that the
MVP operates in the free-run mode for video in-
puts.
Leave it at the INT side unless when using the
MVP for special uses such as locking the MVP to
the video input.
4NTSC/RGB switch
Select whether to set the NTSC input or RGB in-
put to 4-screen magnification.
It is set to the NTSC side at shipment.
* When switching the switch, press the reset
button after switching.
* The RGB input is an option.
5RGB input vertical filter on/off switch
Vertical filter on/off switch of optional RGB in-
puts. If the top and bottom of the RGB input im-
age do not fit inside the output screen, turn on
this switch.
At shipment, it is set to off.
6VIDEO/YC switch
Switch to set whether to input VIDEO or YC into