Pioneer RM-V1000NU 5. SPECIAL INSTALLATION

33
INSTALLATION AND ASSEMBLY
Examples of System
(1)Enlarged display only
LDP C.VIDEO
To MVP input
RM-V1000NU/
RM-V1000NA
RM-V1000NU/
RM-V1000NA
LDP 1
LDP 2
LDP 4
C.VIDEO
To MVP
input
LDP 3
(2)Multi display
LDP 1
LDP 2
LDP 4
LDP 3
To C. VIDEO MPJ input
To C. VIDEO MPJ input
To C. VIDEO MPJ input
To C. VIDEO MPJ input
To C. VIDEO MVP input MVP
5
5
5
5
RS-232C RS-232C
To MPJ
Switching of Displays
¶Enlarged display 1Select the signal displayed by the matrix SW, and send the signal line to the
MVP.
2Set the MPJ input to RGB.
¶Multi display 1Select the signal displayed by the matrix SW, and send the signal line of the
MPJ.
2Set the MPJ input to C. VIDEO.
SW or selector, etc.
Matrix SW
Personal computer
for control
To each MPJ
RGB input
15 mm
15 mm
15 mm
(Fig. 3-15)
15 mm
5. SPECIAL INSTALLATION
(1) Wall inset
¶ When fixing the screen into the wall, leave space at the top, bottom, left and right sides for attaching and
removing the screen.
(2) Diagonal installation
¶This system cannot be placed facing upwards or downwards and diagonally. Always place it horizontally.
(3) Architrave processing
¶When enclosing the screen with a frame, etc., add 15 mm
to the dimensions of the assembled screen at the top, bot-
tom, left, and right. (Fig.3-15)
* Perform framing constructions after assembling the
screen.
¶If light leaks from the rear space after constructions, place
a blind plate over the rear.
(4) Upside down installation
¶Not possible
(5) Hanging from ceiling
¶Not possible