Pioneer S-HTD50, S-HTD5, XV-HTD50, XV-HTD5, S-HTD50, S-HTD5 Connecting the speakers, 2 Connecting Up

2 Connecting Up

Before making or changing any rear panel connections, make sure that all the components are switched off and unplugged from the power supply.

Connecting the speakers

SubwooferFront right

Center

Front left

Red

Surround right

Purple

Green

White

Gray

Blue

Surround left

SPEAKERS		SPEAKERS		ANTENNA	H
					AC INLET
		R L	R L
FRONT	SUB-	CENTER	R	SURROUND
R	L WOOFER		R	L

S-VIDEO

OUT

Connect each speaker using the color-coded speaker cords. Match them to the colored labels above the speaker terminals.

1Twist and pull off the protective shields on each wire.

2Connect one end to the DVD receiver. Match the colored wire with the color- coded label (above the tabs), then insert the colored wire into the red (+) tab and the other wire with the black (–) tab.

3Connect the other end to the speaker in the same way.

Remove the supplied non-slip pads from the paper, and stick four onto the base of each satellite speaker. Actual speakers supplied may differ from those shown.