and using this settings file.

Before start –Important-

Pioneer provides a settings file exclusively for use with the Native Instruments “TRAKTOR PRO 2” DJ software. TRAKTOR PRO 2 can be controlled from this unit by importing this file.

■A computer on which TRAKTOR PRO 2 is installed is required.

■Not all functions of TRAKTOR PRO 2 are supported. Users should make their own settings as necessary.

■To make additional settings, see the TRAKTOR 2 operating manual (PDF file) included with TRAKTOR PRO 2.

■To operate TRAKTOR PRO 2 using this unit’s buttons, see the separate “DDJ-WeGO２Hardware Diagram for TRAKTOR PRO 2”

(PDF file) table of supported functions.

Notice:

・Pioneer will accept no responsibility whatsoever for damages resulting from downloading or installing this settings file. Operation of this settings file is not guaranteed.

・Users should take full responsibility for downloading, installing

・The specifications of this settings file are subject to change without notice.

・Please note that services regarding this settings file may be terminated without notice.

Disclaimer:

Please note that Pioneer will accept no responsibility whatsoever for loss or damage to the customer’s computer caused by the operations based on the information in this Guide. It is advised to use this information at your own risk and on your own responsibility.

Importing a settings file

Cautions:

When another settings file has been imported before, this procedure may not operate properly. In this case, delete the imported settings file before performing this operation. For details, see “Deleting the settings file” on page 2.

1. Save the settings file.

Unzip the downloaded file and save it below location depend on your computer.

—For Windows PC Users

My Documents¥Native Instruments¥Traktor 2.x.x¥Settings

—For Mac OS X Users

Documents/Native Instruments/Traktor 2.x.x/Settings

2.Connect DDJ-ERGO2 and a computer using the USB cable, then turn on the power of DDJ-WeGO2.

3.Launch TRAKTOR PRO 2.
4.Select (Preference) in the upper right of the screen.
5.Click [Import] on the [Preferences] window.

Select the “PIONEER_DDJ-ERGO_Vxxx.tsi” file saved in step 1.

6. Click [OK] to load the settings file.

[Audio Device Settings] is not selected at this stage. Tick the checkbox of [Audio Device Settings] and press [OK].

Backing up the current settings file

We recommend backing up using the procedure below so that the current settings can be restored if necessary.

―This operation is not necessary for those using TRAKTOR PRO 2 for the first time.

1.Select (Preference) in the upper right of the screen.
2.On the [Preferences] window, click [Export].
3.Check the items to be backed up, then click [OK].

Give the file an easily identifiable name (e.g.: BackUp.tsi) and save it in the desired location.

1

7. Device Settings
Open [Controller Manager], select [PIONEER DDJ-WeGO２] at

[Device], then ensure that [All Ports] is selected for [In-Port] and

[Out-Port].

―If DDJ-WeGO２does not work properly in the above settings, select DDJ-WeGO２for [In-Port] and [Out-Port].