No | SAMPLE LAUNCH | Track Decks (Decks A and B) | Remix Decks (Decks C and D) *2 | ||||
Function | When SHIFT button | Function | When SHIFT button | ||||
|
| indicator status | is on | is on | |||
E | BEAT control | Lit dimly | Dry/Wet Single | Effect Parameter2 | Dry/Wet Single | Effect Parameter2 | |
Lit brightly | Dry/Wet Single | Effect Parameter2 | Sample Volume Slot1 | Sample Volume Slot3 | |||
|
| ||||||
F | FX SELECT | Lit dimly | Effect On/Off | — | Effect On/Off | — | |
(TRANS) | Lit brightly | Hot Cue1 | Delete Hot Cue1 | Slot1 *3 | Load From List | ||
G | FX SELECT | Lit dimly | Effect Parameter Reset | — | Effect Parameter Reset | — | |
(FLANGER) | Lit brightly | Hot Cue2 | Delete Hot Cue2 | Slot2 *3 | Load From List | ||
H | FX SELECT | Lit dimly | Effect Button1 | — | Effect Button1 | — | |
(ECHO) | Lit brightly | Hot Cue3 | Delete Hot Cue3 | Slot3 *3 | Load From List | ||
I | FX SELECT | Lit dimly | Effect Button2 | — | Effect Button2 | — | |
(ROLL) | Lit brightly | Hot Cue4 | Delete Hot Cue4 | Slot4 *3 | Load From List | ||
J | LEVEL/DEPTH | Lit dimly | Effect Parameter1 | Effect Parameter3 | Effect Parameter1 | Effect Parameter3 | |
Lit brightly | Effect Parameter1 | Effect Parameter3 | Sample Volume Slot2 | Sample Volume Slot4 | |||
|
|
No | Mixer | ||||
Function | |||||
|
|
|
| ||
K | TRIM control |
|
| Input Gain | |
|
|
|
|
| |
L | EQ [HI] control |
|
| EQ (Hi) | |
M | EQ [MID] control |
|
| EQ (Mid) | |
N | EQ [LOW] control |
|
| EQ (Low) | |
O | FILTER control |
|
| Filter | |
P | Channel fader |
|
| Channel Fader | |
Q | HEADPHONES CUE *4 |
|
| Monitor On/Off | |
R | Crossfader |
|
| Cross Fader | |
|
|
| THRU | Thru | |
S | Crossfader curve |
|
| Smooth | |
|
|
|
| Sharp | |
T | AUTO MIX |
|
| Cruise Mode On/Off |
No | Deck & Mixer | ||||
Function | |||||
|
|
|
| ||
U | INFO/UTILITY |
| DECK Change A | C | |
O | INFO/UTILITY |
| DECK Change B | D |
*2 Operates when the
*3 Operates as shown on the table below according to the slot status.
Slot status | Function |
empty | Load From Deck |
loaded | Play |
Stop | |
playing(Looped) | Mute/Unmute |
*4 When monitoring the sound over headphones, do so with the HEADPHONES MIX knob in TRAKTOR turned all the way to the CUE side.
•The amount of change in the sound and playing speed when such operations as scratching and pitch bending are performed differs from when operations are performed on the
•The various functions of TRAKTOR PRO 2 can be assigned to buttons on the
•MIDI channels 1 to 7 are used with this unit’s MIDI mapping file, so when using another CDJ player or a device of a different brand connected to the computer by USB cable together with this unit, set the other device(s) MIDI channel(s) to “8” or higher.
•For instructions on setting the MIDI channel, see the respective device’s operating instructions.
9