04Getting started

Chapter 4:

Getting started

Turning on

Press STANDBY/ON.The product switches to the last selected source.

APS mode

•After this product is kept inactive for 15 minutes, it automatically switches to the standby mode.

–The clock is displayed.–If the clock is not set, [--:--] blinks.How to turn off the APS mode:

•Press and hold to turn off the APS mode in the standby mode and [APS OFF] is displayed.

•If the APS mode is turned on again, Press and hold  in the standby mode and [APS ON] is displayed.

Note

•When an iPod/iPhone is connected, the light of the main display stays on even if it automatically switches to the standby mode.

Setting the clock

The product uses the 24-hour time format.1In the standby mode, press and hold DISPLAY/CLOCK for 2 seconds.The hour digits blink.2Press / to set the hour.3Press DISPLAY/CLOCK again.The minute digits blink.4Press / to set the minute.5Press DISPLAY/CLOCK to confirm the setup.

12

Finding the correct video input channel

1Turn on the product.

2Press DISC/USB on the remote control or INPUT repeatedly on the main unit to select the disc source.

•Turn on the TV and switch to the correct video-in channel.

Note

•See the user manual of your TV for how to switch between video-in channels.

Selecting the correct TV system

This product is compatible with both NTSC and PAL. If the picture is abnormally displayed with the default setting, select

a TV system that matches your TV. (Refer to “Setup” > > [TV SYSTEM] for details)

Selecting a language for on-screen display

English, French, German, Italian, Spanish, and Dutch are the default language options for this setting. (See “Setup” > > [OSD LANGUAGE] for details)

En