Customizing preferences

Chapter

31

1Display the “AV System Settings” screen.

=For details, refer to Displaying the “AV Sys- tem Settings” screen on the previous page.

2Touch [AV2 Input].

Each touch of [AV2 Input] changes the setting as follows:

!Off: No video component is connected.

!EXT: Pioneer external unit connected with the RCA video cable

!Video: External video component

Changing the wide screen mode

1Display the “AV System Settings” screen.

=For details, refer to Displaying the “AV Sys- tem Settings” screen on the previous page.

2Touch [Wide Mode].

Each touch of [Wide Mode] changes the setting as follows:

!Full (full)

A 4:3 picture is enlarged in the horizontal direction only, enabling you to enjoy a 4:3 TV picture (normal picture) without any omissions.

!Cinema (cinema)

A picture is enlarged by the same propor- tion as Full or Zoom in the horizontal direc- tion and by an intermediate proportion between Full and Zoom in the vertical di- rection; ideal for a cinema-sized picture (wide screen picture) where captions lie outside the frame.

!Zoom (zoom)

A 4:3 picture is enlarged in the same pro- portion both vertically and horizontally; ideal for a cinema-sized picture (wide screen picture).

!Normal (normal)

A 4:3 picture is displayed normally, giving you no sense of disparity since its propor- tions are the same as that of the normal picture.

pDifferent settings can be stored for each video source.

pThe same setting is automatically applied for the following grouping.

!DVD-V and DivX

!AV1 and AV2

!EXT1 and EXT2

pWhen video is viewed in a wide screen mode that does not match its original as-

pect ratio, it may look strange.

pRemember that use of this system for com-

mercial or public viewing purposes may constitute an infringement on the author’s rights protected by the Copyright Law.

pThe navigation map and the rear view cam- era picture is always viewed at Full.

Setting the rear output

The navigation system’s rear output can be used for a full-range speaker or subwoofer connection. If you switch Rear SP to Sub. W, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. Initially, the navigation system is set for a rear full-range speaker connection (Full).

pBoth rear speaker leads output and RCA rear output are switched simultaneously in

this setting. (When you use the product without RCA rear output, this setting only applies to the rear speaker leads.)

p“Rear SP” can be set only when the source is selected to “Off”.

1Display the “AV System Settings” screen.

=For details, refer to Displaying the “AV Sys- tem Settings” screen on the previous page.

2Touch [Rear SP].

Each touch of [Rear SP] changes the settings as follows:

!Full

When no subwoofer is connected to the rear output, select “Full”.

!Sub. W

When a subwoofer is connected to the rear output, select “Sub. W”.

preferences Customizing

En 169