!When the [SYNC (MASTER)] button is pressed, the playing speeds and beats of the two decks are synchronized instantaneously.

3Operate the channel faders or crossfader to mix the sound of the two decks and switch between them.

Inputting the sound of an external device or microphone

The sound of the external device connected to the [AUX IN] terminals or the sound of the microphone connected to the [MIC] terminal can be mixed.

1Connect the external device to the [AUX IN] or [MIC] terminal.

2Switch the [AUX, MIC] selector switch.

—[AUX]: Selects the external device connected to the [AUX IN] terminals.

—[MIC]: Selects the microphone connected to the [MIC] terminal.

3Make the TRAKTOR LE 2 software’s [Preferences] > [Input Routing] setting.

Set [Input Aux] as shown below.

—[L(Mono)]:DDJ-ERGO AUX/MIC L

—[R]:DDJ-ERGO AUX/MIC R

4Adjust the audio level input to the [AUX IN] or [MIC] terminals.

—Turn the [MIC VOL] control on the main unit’s rear panel: The [MIC] terminals’ input audio level is adjusted.

—Turn the [AUX IN VOL] control on the main unit’s rear panel: The [AUX IN] terminals’ input audio level is adjusted.

Pioneer DJ player: Set near the center position.

Portable audio player or other device with low volume: Set clock- wise of the center position.

5Turn this unit’s [AUX/MIC VOL] control.

Turn this unit’s [AUX/MIC VOL] control to set the volume to a suitable level.

Quitting the system

1Quit TRAKTOR LE 2.

2Slide this unit’s [ON/OFF] switch to the [OFF] position.

3Disconnect the USB cable from your computer.

4Turn off the connected microphone and external equipment.

20En