1 • Introduction
Safety
The equipment is supplied with a moulded mains lead and plug which should be used. If the lead cannot be used as supplied for any reason, the following information applies:
1.An approved mains lead for the country concerned must be used.
2.As the colours of the wires in the mains lead of this equipment may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
-The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with the letter “E” or
by the earth symbol 
or coloured green or green and yellow.
-The wire which is coloured blue must be connected to the terminal which is marked with the letter “N” or coloured black.
-The wire which is coloured brown must be connected to the terminal which is marked with the letter “L” or coloured red.
3.The wires in the supplied mains lead are coloured in accordance with the following code:
Green and Yellow | - | Earth |
Blue | - | Neutral |
Brown | - | Live |
WARNING:
THIS EQUIPMENT MUST BE EARTHED
The socket outlet should be near to the equipment and should be easily accessible.
To comply with health and safety standards, operators must observe all local standard safety precautions relating to the operation of office equipment. In particular, DO NOT remove covers from the machine. Refer all servicing to qualified personnel.
Keep hands, jewellery, ties, long hair, etc. away from moving parts.
If you are in any doubt at all about your ability to safely do such work, you should consult a qualified electrician.
SDC755A |