3 • Running Mail
Automatically Feeding Envelopes (DM400c)
1.Load envelopes into the feeder face up with their top edges against the registration wall.
2.Slide the side guide up to the envelopes. Allow clearance so that envelope feed is not restricted.
3.Select seal or no- seal using the Seal/No Seal Lever.
Start button
Seal/ No Seal Lever
Side Guide
4.Press Start. The system automatically feeds the envelopes, prints the digital meter stamp and ejects the envelope.
IMPORTANT: Always ensure that your prints are clear and complete. Poor prints may be rejected by your Postal Authority. If you notice missing lines in the print as shown in the illustration, perform a printhead purge as described on page
The indicia above is a black and white representation of the approved Red indicia. Only Red approved ink should be used in the machine.
SDC755A |