Pitney Bowes N400 Remove packing, Locate the plug ports, Tuck the cords under Guides

4 Remove packing.

Lift the

platter, remove the packing material,

and replace

the platter on the scale.

6 Locate the plug ports.

Locate

the plug ports under the front of the scale

and plug in the small end of the power cord.

Tuck the cord(s) under the

8 guides.

Tuck the cord(s) under the guides on the bottom of the scale.

5 Level the scale.

Bubble must be in center.

Adjustable

Feet (4)

Level the scale by turning the scale feet until the leveling bubble is centered and the scale does not wobble.

7	Connect scale-meter interface
	cable to scale.

If you're using a

Pitney Bowes

meter, plug the small end of the scale-meter interface cable into the scale port.

9	Connect scale-meter interface
	cable to meter.

or

If you're using a Pitney Bowes meter, connect the large end of the scale-meter interface cable to your meter's communications port. Tighten the thumbscrews securely. See the meter's operating guide for the location of the port.

2