Pixel Magic Systems SE150-DH, SE150-HH user manual Setup Guide

Setup Guide:

(1)Connect the HDMI/DVI source (DVD Player, Set-top box or PC) into the Signal Enhancer IN port through a HDMI or DVI cable

(2)The incoming cable length can be up to 150ft / 45m. High quality HDMI/DVI cable is recommended.

(3)Use a short HDMI/DVI cable to connect from the Signal Enhancer OUT port to digital display device.

(4)It is recommended to use an outgoing cable not longer than 2m or 6.6ft for the best result.

(5)Please connect the external power adapter with the right power plug to the Signal Enhancer. If the incoming cable is short and the cable can provide a stable +5V power as per the HDMI/DVI standard, it is possible to power the Signal Enhancer with the incoming cable and the power adapter is not needed.

LED Status:

POWER LED OFF –No power

POWER LED RED –The unit is powered by the incoming cable (not recommended for long incoming cable)

POWER LED GREEN –The unit is powered by the external power adapter CLOCK LED BLUE –Incoming clock signal detected

CLOCK LED OFF –No incoming clock signal detected