Planar IX2850 Basic Operation and Calibration/Reset Instructions

Basic Operation and Calibration/Reset Instructions

Before using the LED LCD Monitor:

 Connect external equipment properly.

 Insert the power plug, and the power LED indicator will light orange.

To turn the LED LCD Monitor on/off:

Press button on the front. The power LED indicator light will be blue when the LED LCD

Monitor is on.

Use OSD menus to adjust settings by using the menu button on the front of the LED LCD

Monitor.

Displays main menu

1 Exits from OSD menu

Selects between DisplayPort1, DisplayPort2, HDMI1, HDMI2, DVI, or VGA mode

2 Press 3 seconds activates Auto Image Adjust (VGA only)

Select the desired item when in OSD menu

▼ When not in OSD menu, holding for 1 second directly enters Audio menu

When holding for 3 seconds directly enters Color Preset Modes

Select the desired item when in OSD menu

▲ When not in OSD menu, holding for 1 second directly enters PIP/PBP menu

When holding for 3 seconds directly swaps PIP/2PBP images only

▼ + ▲ Recalls both Contrast and Brightness (when not in OSD menu)

When LED LCD Monitor is in normal mode, the “OSD Lock Out” function can be enabled.

Option 1: OSD lock – all 4 buttons are locked except the “POWER” button.

Press and hold the 1 button and the ▲ button for 3 seconds to lock the OSD buttons.

The LED LCD Monitor will show an “OSD Locked” message for 3 seconds and the message will

disappear automatically.

Repeat this step to unlock.