6 Connecting Power,
Turning It On/Off
Connecting Power, Turning Display On/Off
The m52L typically draws up to 4.5A at 115V or 2.25A at 230V.
For countries outside of North America, it is the responsibility of
the installer to provide the power supply cord certified for use in
the destination country.
Connect a power cable to the power supply and to an AC
source. The power supply is auto-ranging, so it works with any
source from 100 to 240 VAC, 50 to 60 Hz.
The AC Master switch is located next to the power receptacle,
both of which are located in the rear of the display.

About UPS Supplies

Some installations use a UPS - Uninter-
ruptible Power Supply. Most UPS
devices will work with the m52L. Review
the power specifications of your UPS
device to make sure it is compatible with the m52L.

Turning Power On/Off

1 With the power cord attached, turn on the power switch
located on the back of the unit.
2 Turn on the m52L by aiming the
remote at the IR sensor in the lower
right corner of the screen (landscape)
or the lower left corner of the screen
(portrait), and pressing the ON button.
3 To turn off the m52L, press the OFF
button.
Downloaded From TV-Manual.com Manuals