Planar PD370 user manual Basic operation, Connecting to a Computer, Info, Using the Menu Screen

Connecting to a Computer

Connect the monitor to the computer using an HD 15-pin VGA cable. Secure the cable connectors by tightening the screws on both sides of the plug.

Basic operation

Connect the required external source equipment to the monitor before following these procedures.

Info

The OSD is automatically preset to English. To change the on-screen display language, refer to section E of the OSD Menu Function on page 19.

A. Connecting the Power Cable

Connect the power cord to the power cord connector on the back of the monitor. Plug the power cord into an AC wall socket and press power switch to “│” to power on, or “○” to power off the monitor.

B. Turning Power On

Once power switch is “on” (see above), press the Power ON button on the side of the monitor or remote control.

C. Selecting Input Source

To select the Input Source for the monitor, press the SOURCE button on the side of the monitor or press the desired source key on the remote control. Also, pressing the AUTO key on the remote control will cycle to the next active source input.

D. Turning Power Off

To turn off the monitor, press the Power OFF button on the side of the monitor or remote control.

Using the Menu Screen

The image and monitor settings can be adjusted through the MENU as listed on the monitor button panel or remote control using the following procedures:

11