6
Introduction
Using the Remote Control
When using the remote control:
•Do not drop it, or expose it to moisture or high temperature.
•The remote control may not function correctly under fluorescent lamps. Operate the projector away from
fluorescent lamps.

Inserting the Batteries

The batteries (two “AAA”) are included in the package.
Note
•The signal from the remote control can be reflected by the screen.
1Press down the tab on the cover
and slide the cover towards the
direction of the arrow.
2Insert the included batteries.
Make sure the polarities correctly match
the and marks inside the battery
compartment.
3Insert the lower tab of the cover
into the opening, and press down
the cover until it clicks in place.