Chapter 3 Technical Information
Specifications
LCD Panel | Hannstar | |
Size | 15.0" (38 cm) | |
Display Type | Active matrix color TFT LCD | |
Resolution | 1024 x 768 | |
Display Dot | 1024 x (RGB) x 768 | |
Display Area (mm) | 304 x 228 (H x V) | |
Display Color | 262K | |
Brightness | 200 cd/m2 (typical) | |
Contrast Ratio | 400:1 (typical) | |
Response Time | 35 ms (typical) | |
Lamp Voltage | 730 Vrms (typical) | |
Lamp Current | 6.5 mA rms. (typical) | |
Viewing Angle | Vertical: | |
Display Colors | Horizontal: | |
16.7M with FRC or Dithering | ||
Video | Analog RGB | |
Input Signal | ||
Input Impedance | 75 Ohm ± 2% | |
Polarity | Positive, Negative | |
Amplitude | (0 - | |
Horizontal Frequency: 24 ~ 61 KHz | ||
|
| Vertical Frequency: 55 ~ 75 Hz |
Control | On/Off switch with LED indicator | |
Power |
| |
OSD | Digital | |
Brightness | ||
Contrast | Digital | |
Horizontal Position | Digital | |
Vertical Position | Digital | |
Phase | Digital | |
Clock | Digital | |
Display Mode Setup | Use EEPROM to save settings in memory | |
OSD Format | 20 characters x 9 rows | |
Power Management |
|
Mode
Power Consumption*
AC Input
LED Color
On | 30W maximum | 240 VAC | Green | |
Standby | 3W maximum | 240 VAC | Yellow | |
Suspend | 3W maximum | 240 VAC | Yellow | |
Off | 3W maximum | 240 VAC | Yellow | |
DC Power Off | 3W maximum | 240 VAC | Dark | |
Disconnected | 3W maximum | 240 VAC | Yellow: Standby, Suspend, Off | |
Dark: DC Power off | ||||
|
|
|
* Meeting VESA DPMS requirements measured from AC Input end of AC adapter.
Sync Input
Signal | Separate TTL compatible horizontal and vertical synchronization |
Polarity | Positive and negative |
| 6 |