Planar PL1910 M manual Technical Information, Specifications

Chapter 3 Technical Information

Specifications

LCD Panel	PL1910M
Size	19" (48 cm)
Display Type	Active matrix color TFT LCD
Resolution	1280 x 1024
Display Dot	1280 x (RGB) x 1024
Display Area (mm)	376.32 x 301.056 (H x V)
Display Color	16.7M
Brightness	300 cd/m2 (typical) / 240 cd/m2 (minimum)
Contrast Ratio	700:1 (typical)
Response Time	Ta=25°C Tr=15ms Tf=10ms
Lamp Voltage	750 Vrms (typical)
Lamp Current	7.0 mA rms. (typical)
Viewing Angle	Vertical: -85° ~ +85°
	Horizontal: -85° ~ +85°

Video

Input Signal		Analog RGB 0.7Vp-p	Digital TMDS
Input Impedance		75 Ohm ± 2%
Polarity		Positive, Negative
Amplitude		0 - 0.7 ± 0.05 Vp	TMDS
Multi-mode Supported		Horizontal Frequency: 24 ~ 80 KHz	24~80KHz
Audio		Vertical Frequency: 49 ~ 75 Hz	49~75 Hz
Input		500mVrms
Output		1W+1W
Control		On/Off switch with LED indicator
Power switch	(hard and soft types)
OSD
Brightness		Digital
Contrast		Digital
Horizontal Position		Digital
Vertical Position		Digital
Phase		Digital
Clock		Digital
Display Mode Setup		Use EEPROM to save settings in memory
OSD Format		26 characters x 15 rows

Power Management

Mode	Power Consumption*	AC Input	LED Color
On	55W maximum	240 VAC	Green
Off	3W maximum	240 VAC	Yellow
Soft switch off	3W maximum	240 VAC	Dark
Disconnected	3W maximum	240 VAC	Yellow: Standby, Suspend, Off
			Dark: Power off

* Meeting VESA DPMS requirements measured from AC Input.

6