Planar PL1910M manual Connecting the AC Power, Connecting the Audio Cable, Power Management System

Connecting the AC Power

1. Connect the power cord to the AC socket. (See Fig. 1-6)

2. Connect the power cord to an AC power source.

Figure 1-6

Connecting the Audio Cable

1.Connect the audio cable to the "LINE OUT " jack on your PC's audio card or to the front panel's “AUDIO OUT” jack of your CD ROM drive. (See Fig. 1-7)

2.Connect the other end of the audio cable to the LCD Monitor's

"LINE IN" jack.

Figure 1-7

Power Management System

This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The VESA DPMS provides four power saving modes through detecting a horizontal or vertical sync. signal. When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED indicator will light yellow.

6