Planar PLL1911M manual First Setup, Installing the Stand Base, Monitor Adjustment

First Setup

Congratulations on your purchase of this high performance LED edge lit, LCD monitor. This LED LCD monitor comes with the following accessories :

	LED LCD monitor		Power Cable
	User’s Guide		Audio Cable
	VGA Cable		DVI Cable

Installing the Stand Base

1.Turn the monitor over and set it upside down.

2.Align the monitor to the slots on the stand.

3.Turn the screw clockwise to attach the base to the monitor.

4.Check the underside of the stand to ensure that the monitor has been firmly installed to the stand and that the screws do not loosen.

Monitor Adjustment

The LED LCD Monitor is designed to have a tilt range of -5°to 19°, a swivel range of -30°to 30°,

and a height adjustment of 4.3” (110mm).

5