Planar PLL2010MW manual Controls and Connectors Power Cord, Signal Cable, Power Source

CONTROLS AND CONNECTORS

POWER CORD

Power Source:

1.Make sure that the power cord is the correct type required in your area.

2.This LCD monitor has an internal universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.)

3.Connect the AC-power cord into your LCD monitor’s power input socket, The AC-power cord may be connected to either a wall power outlet or the power outlet socket on your PC, depending on the type of power cord supplied with your LCD monitor.

SIGNAL CABLE

Connecting the Signal Cable :Plug one end of the signal cable to the LCD monitor and the other end to a computer or a video source.

Caution: If the AC outlet is not grounded (with three holes), install the proper grounding adapter (not supplied).

1.

2.

3.

4.

1	2	3	4
Figure 2		Connecting Cables

Power Cable

Audio cable

DVI Cable

D-SUB cable

8