20
Touch Screen Driver Installation
Follows are the procedures for touch screen driver setting up.

Windows Environment

1. Insert the CD-ROM in your computers CD-ROM drive.
2. Follow the directions on screen to complete the driver setup for your
version of Windows.
* If the AutoStart feature is not active:
1. Click Start > Run
2. Click the Browse button to locate the touch.exe program on
the CD-ROM.
3. Click Open, then OK to run the touch.exe.
4. Follow the directions on screen to complete the driver setup for
your version of Windows.

DOS Environment

1. Insert the CD-ROM in your computers CD-ROM drive.
2. From DOS, type d:\EloDW to change to the correct directory on the
CD-ROM ( your CD-ROM drive may be mapped to a different driver
letter).
2. Type Install and press Enter to start the installation.
3. Align the touch screen.