Planar PT1710MX manual Using the RS232 connection

22

If you are using a PC running Windows® Vista, XP or 2000 operating system, follow the instructions below.

Using the RS232 connection:

1.Be sure that RS232 cable is connected from the computer.

2.Power on the computer.

3.Load the touch screen driver CD.

4.Follow the step-by-step instructions as shown on pop-up windows.

Using the USB connection:

1.Be sure that USB cable is connected from the computer.

2.Power on the computer.

3.Load the touch screen driver CD.

4.Follow the step-by-step instructions as shown on pop-up windows.

If you are using a PC running Windows® XP Embedded, follow the instructions below:

1.Power on the computer.

2.Make sure that the RS232 or USB cable is connected to the computer.

3.Be sure that your EWF (Enhanced Write Filter) is disabled. If your EWF is enabled, please disable the EWF by using the EWF Manager command.

4.Once the EWF is disabled click on the XP driver on the CD and follow the step-by-step instructions as shown on the pop-up windows.