Quick Installation
1.Connect video cable (VGA cable)
Make sure both monitor and computer are powered OFF. Connect the video cable (VGA cable) to the computer, then to the monitor.
2.Connect DVI cable
Connect the DVI cable from DVI output of computer to the DVI input of the monitor.
3.Connect HDMI cable (Not supplied)
Connect the HDMI cable from the HDMI output of a computer, or video source, to the HDMI input of the monitor.
4.Connect power cord
Connect the power cord to a properly grounded AC outlet, then to the monitor.
5.
6.Set the timing mode on your computer.
Recommended resolution and refresh rate is 1920 x 1080 @ 60Hz.
Example:
PC
Audio cable (not supplied)
Power cable
DVI cable
VGA cable
HDMI cable (not supplied)
6
