7
Basic Operation and Calibration/Reset Instructions Before using the Touch LED LCD Monitor:
Connect external equipment properly.
Insert the power plug, and the power LED indicator will light orange.
Power On/Off
To turn the Touch LED LCD Monitor on/off:
Press POWER button on the front. The power LED indicator light will be blue when the
Touchscreen LED Monitor is on.
Using the OSD Menu
Use OSD menus to adjust settings by using the menu button on the front of the Touchscreen
LED Monitor.
Displays main menu
1 Exits from OSD menu
2 Selects between VGA, DVI, HDMI or Auto mode
Select the desired item when in OSD menu
▼
When not in OSD menu, directly enters Volume adjust
Select the desired item when in OSD menu
▲
When not in OSD menu, directly enters Preset Mode
▼ + ▲ Recalls both Contrast and Brightness (when not in OSD menu)
OSD Lock Out Function
When Touchscreen LED Monitor is in normal mode, the “OSD Lock Out” function can be enabled.
Option 1: OSD lock – all 4 buttons are locked except the “POWER” button.
Press and hold the 1 button and the ▲ button for 3 seconds to lock the OSD buttons.
The Touch LED LCD Monitor will show an “OSD Locked” message for 3 seconds and the message
will disappear automatically.
Repeat this step to unlock.