ADE-4100 User Manual

System Default Gateway Configuration

The system-wide Default Gateway now provides three options: Auto, User- selected Network Interface, and None.

None

This field allows the user to choose to have no Default Gateway in the CPE

Auto

This field allows the user to select the CPE to automatically decide the Default Gateway. (System Default)

User-selected Network Interface

This field allows user to select a Network Interface from a list (PVCs, PPP Sessions, USB and LAN). This option lets the user to associate the system-wide Default Gateway to a Network Interface, static or dynamic, and provides a way to fix the Default Gateway to a dynamic Network Interface before the interface is established.

Route Configuration

Destination

This field allows the user to enter the remote network or host IP address for the static routing.

Netmask

This field allows the user to enter the Subnet Mask for the static routing.

Gateway

This field allows the user to enter the IP address of the gateway device that allows the router to contact the remote network or the host for Specified IP or select an Interface for the Gateway.

Manually Configured Routes displays the static route entries entered by the user

Learned MAC Table

The Learned MAC Table page shows the current learned Bridge MAC table. The Aging Timeout is for determining the update period for the MAC table.

Figure 6-5:Learned MAC Table Screen

40