Rear Panel Port and Button Definition

 

 

 

 

 

 

Connector

 

 

Description

 

POWER

 

The power button is for turn on or turns off the router.

 

Button

 

 

 

 

 

 

The reset button can restore the default settings of device. To restore factory

 

Reset

 

defaults, keep the device powered on and push a paper clip into the hole.

 

 

 

 

Press down the button over 5 seconds and then release.

 

Power

 

Power connector with 12V DC 1.5 A

 

Ethernet

 

Router is successfully connected to a device through the corresponding port

 

 

(1, 2, 3, or 4). If the LED is flashing, the Router is actively sending or receiving

1-4

 

 

 

 

data over that port.

 

 

 

 

 

Line

 

The RJ-11 connector allows data communication between the modem and the

 

 

ADSL network through a twisted-pair phone wire.

 

 

 

 

 

 

 

 

 

13